Resetting your IP...

To reset the IP number on Mac 8 through 9:
Try rebooting first. If you still get a number that begins with 169, you must trash the TCP/IP Preferences.
Opening the Preferences Folder:
· Open the Hard Drive, System Folder, Preferences Folder.
· In the Preferences folder delete the TCP/IP preferences.
The Mac will automatically create new preferences. You will have to reconfigure the TCP/IP settings.



To reset the IP number on Mac X:
. Quit all Internet applications.
· Select the Apple Menu > System Preferences.
· Click on Network.
· From "Show" dropdown menu choose Network Port Configurations.
. Remove the checkmark next to "Built-in Ethernet" then click the "Apply Now" button.
. Restart your computer.
. Repeat steps 2, 3 and 4 and place the checkmark back in the box for "Built-in Ethernet". Then click the Apply Now button.
. Reopen your Internet applications.



To reset the IP number on a PC:
Use ipconfig to release your current IP and obtain a new one.
From Start select Run, type Command.
In the Command window:
· type ipconfig /release. This releases the current IP number (for Windows ME ipconfig /release_all).
· type ipconfig /renew. This selects a new IP number (for Windows ME ipconfig /renew_all).
· type ipconfig. This displays the new IP number.
· Close the Command Window.



Now for the new stuff, as I mentioned earlier some of you said the above processes just didn't work for you, that's ok I won't leave you feeling left out, if the techniques listed above didn't help you in any way this one will.



- Exit all of your internet devices, (such as icq, etc), close any open internet pages.

- Click "Start".
- Select "Run".
- In the "Run" line type, "cmd".
- This will bring up a new window, which looks like ms-dos, in this new window type (without the "s) "ipconfig /release".
- Close the window resembling ms-dos.
- Click "Start"
- Select "My Computer".
- Select "My Network Places", on the left hand side of the screen.
- Select "View Network Connections", on the left hand side of the screen.
- Right click the icon which says "Local Area Connection" then click "Properties.
- Click the "General" tab.
- Highlight the "Internet Protocol"
- Click "Properties", it's in the general tab.
- This will open a new window, click the "General" tab in this new window.
- You should see a box labeled "Use the following IP address", click it.
- You should notice three bars have lit up.
- In the first bar, labeled "IP address" type "1" until that whole bar is filled with "1"s.
- Use tab to select the "Subnet mask", it should have filled in itself.
- Click "Ok".
- Close everything now, every window, everything, I want you to see nothing but your desktop.
- Click "Start"
- Select "My Computer".
- Select "My Network Places", on the left hand side of the screen.
- Select "View Network Connections", on the left hand side of the screen.
- Right click the icon which says "Local Area Connection" then click "Properties.
- Click the "General" tab.
- Highlight the "Internet Protocol"
- Click "Properties", it's in the general tab.
- This will open a new window, click the "General" tab in this new window.
- You should see a box labeled "Obtain an IP address automatically", click it.
- This will give you a brand new IP number.


Note to moderators: don't try to ban me...